2001-2017 Nissan Leaf Tail as Turn Module, DIY (Pair)
This product is currently sold out.
This is the do-it-yourself version of our popular Tail as Turn module. It is Made in USA, by Diode Dynamics, in St. Louis, Missouri.
With this simple power control module, you can convert any LED tail lamp to also function as the turn signal, for a much more modern appearance. It will work very well in any vehicle where the turn signal is a traditional filament bulb.
To install this module, you only need to work with the brake light wire and turn signal wire on each side of your vehicle. Installation is simple, but we include instructions with every order.
Once you've converted the tail light to function as the turn signal, you'll be left with an unused bulb! When installing, you can choose to eliminate it and leave it off, or keep it blinking as a turn signal. Or, if you convert the old turn signal bulb to an LED, you can easily make it another brake light!
If your old turn signal bulb had a clear lens, you can throw a white LED in, and tap the backup light circuit to create a brighter backup light! Since this module opens a bulb to be used how you please, the possibilities for configuration are endless, and we include many scenarios in the instructions. Also remember, this module simply controls 12V power, and can be used for a variety of purposes, if you're feeling creative!
This module is designed to power LED tail lamps only, with a maximum two amp total power draw. It should not be used to illuminate incandescent bulbs.
Please note: By eliminating the factory turn signal with this module, you will decrease power draw on the turn signal circuit, causing most vehicles to hyperblink, as the vehicle thinks the bulb is out. To fix this, we recommend replacing the flasher module if possible, or you can install resistors to replicate the factory load.